The Best Ways to Clean a Jetted Tub

When you do your housekeeping routine, there are different techniques to take into consideration once you’re confident your jetted tub needs a deep cleaning, which probably does. The majority of these procedures are inexpensive, using only basic home goods or cleaners and no visits to the neighborhood hardware shop. So, before you begin with your house cleaning in Sacramento specifically with your jetted tub, learn first about how to clean it by referring to these four easy ways:

1. Using Vinegar 

• Fill the tub as much as you can with the warmest water first.
• To the tub, add two glasses of vinegar. Usually, the finest solution for cleaning bathtubs is white distilled vinegar.
• Activate the jets when the air-induction valves are closed.
• Run the jets for about 15 minutes at their maximum setting.
• Refill the bathtub with hot water after emptying it. Repeat the same procedure, but skip the vinegar this time. For cleaning the jets of mold, this technique works really well.

2. Using Baking Soda

• Baking soda is one of the best cleaners in your housekeeping habit. So, the first thing that you should do is cover your tub with a thin layer of baking soda. It has enough abrasive power to remove mold and soap scum without damaging the tub.
• With a moist towel, scrub the bathtub. The waterline, the region around the drain, and the faucet are important places to pay attention to. Let the baking soda dry before rinsing.
• To remove any filth within the jets, use an old toothbrush to scrape the exterior of the tub jets.
• Pour enough hot or warm water into your tub to ensure smooth operation of the jets.
• Scrub away any leftover baking soda buildup after running the jets for around 15 minutes.
• Depending on how much dirt comes out of the jets during deep cleaning, repeat this procedure two or three times for maintenance cleanings.
• For an additional cleaning boost, you may also add vinegar to the water.

3. Using Dishwasher Detergent and Bleach

• Wipe hair, dirt, and caked-on grime off from the tub’s basin, rim, and external parts first.
• Hot water should be added to the tub until it reaches a few inches past the jets.
• Put on a pair of safety goggles and gloves.
• Add a few tablespoons of liquid dishwashing detergent and a half cup of bleach to the water as your active cleaners. Before adding the bleach, make sure to read the directions for your tub. Some manufacturers advise against doing so because it might cause the gaskets to dry out over time. Replace bleach with vinegar if you’re worried about it.
• Turn on the jets after closing the air-induction valves. You want water to circulate just within the internal piping of the tub, therefore keeping the induction valves closed makes that happen.
• In order to remove all debris-filled water, keep the jets running continuously for ten to fifteen minutes.
• Without adding more cleaning solutions, empty the tub of water, refill it, and repeat the procedure.

4. Using a Jet Tub Cleaner

• Spend between $10 and $20 to buy a jet tub cleaner.
• Clean out any dirt from the tub’s exposed parts.
• Add the cleaning solution in the specified quantity after filling the tub with hot water.
• Turn on the jets after closing the air-induction valves. Run the jets for fifteen minutes.
• If needed, drain the water and repeat.

5. Cleaning Advice for Your Tub

1. Consider utilizing the next maintenance advice to keep your jetted tub functioning properly now that it is sparkling and welcoming.
2. Follow a deep cleaning schedule: To reduce the accumulation of dirt and grime, deep clean your jetted tub once a month and spot clean it once a week.
3. Bath oils and bubble bath pods should be avoided since they might leave residue on and around the jets. In addition to being unattractive, this residue makes the ideal food for mildew and mold.
4. Abrasive cleaners should not be used on your jet tub. This includes wire brushes. Small scratches made by these instruments act as mud-filled havens.
5. Do not allow your furry friends to enter. To avoid adding more hair, filth, and grime from your pets, keep them out of the tub.
6. An annual plumbing examination should be performed to make sure the tub’s supply lines are in excellent condition.

The ways for deep cleaning a jet tub described here are inexpensive, quick, simple, and efficient. Nevertheless, you can think about calling a nearby plumber if you see any persistent problems that aren’t fixed by deep cleaning.

For instance, a deeper issue with the tub’s mechanics or the plumbing system may be indicated if the tub won’t drain during your house cleaning in San Diego or needs more frequent thorough cleanings than once a month. Direct the plumber to examine your jetted tub when you complete your yearly plumbing check.